• This forum has 554 topics, 1,467 replies, and was last updated July 9, 2024 by Jacob C.
    • VMware
    • Offsiteclone fails due to not synchronized VPG

      Hey Guys, after some internal network problems, we need to create an offsite-clone of a corrupted vm. Currently Zerto is performing multiple bitmap-syncs of different VPGs including the one in which the mentionend vm resides in. After the cloning operation ran for at least 8 hours it failed with an error that states, that host […]

    • People: 1
      Replies: 0
    • September 14, 2020
    • Datastore Cluster are not visible in ZVM

      After installing ZVM and going to SETUP => DATASTORE Tab I cannot see any datastore that belongs to a datastore cluster in vmware environment. Datastore that are not part of datastore cluster configuration are visible. I noticed that this symptom occurs only when adding datastores to a cluster datastore. If I remove them from cluster […]

    • People: 1
      Replies: 0
    • September 11, 2020
    • Detect new unprotected VMs

      What I’m looking to do is somehow detect when a new VM has been created, and alert me, so I can determine if this new VM needs Zerto protection or not. I’m in a small shop where multiple people can create VM’s, and if I don’t know about it, Zerto protection won’t get configured. Has […]

    • People: 1
      Replies: 0
    • September 10, 2020
    • Cancel Failover From vSphere

      If a failover task (VMWare to Hyper-V) is cancelled in vSphere, in the “Failing Over Before Commit” stage, the task is still showing as running in Zerto.  Is it really running? And if so, what is the proper way to “cancel” a failover, since all of the options are grayed out?

    • People: 1
      Replies: 0
    • September 10, 2020
    • The VPG test / live failover Commit needs delay.

      In a vCloud environment when you do a VPG test / live failover or a move, the ZVM will sort out the task and then it will prompt you for a Commit.  If you agree too quickly to this prompt it will fail because it can’t find the VAPP/VM changes in the source/destination vClouds because […]

    • People: 1
      Replies: 1
    • September 7, 2020
    • Error Failed Logging

      Guys my Zerto in VMware return is error about: Failed logging in to IPZERTO with username USERVCENTER. Error was ‘Exception running : StandaloneVcLogin’ Please try again … try to use fully qualified domain name for login Help-me!

    • People: 1
      Replies: 2
    • September 1, 2020
    • failover Deails

      hi I am looking for a script, to retrive all the following information list all the vpg, Including the network detailed information, Portgroup Server name Faileover ip   help would be appreciated

    • People: 1
      Replies: 0
    • August 27, 2020
    • Difficulty seeding VPG on high perf infra and L2

      I’ve dealt with seeding VPG’s to remote sites before but am finding issues with high change rate VM’s replicating from on vCenter to the other in same data center. VRA’s on on the same L2 network. Temp disk is enabled for tempdb. VRA’s are configured for 2vCPU/12GRAM. This is All flash vmax/pmax storage on UCS […]

    • People: 1
      Replies: 0
    • August 11, 2020
    • Combination of vsphere replication and Zerto.

      Hello I have a question about Zerto specification. Is it possible to use vsphere replication in the following order? I know that it is unable to protect VMs that using vsphere replication at the same time with Zerto. 1. Protect a VM with a VPG of Zerto. 2. Finalize initial sync of the Zerto. 3 […]

    • People: 2
      Replies: 3
    • August 11, 2020
    • AWS to On Prem

      I believe I can migrate my VMs currently located on AWS to a new on prem cluster using Zerto, can you point me to the documentation on how to do this?

    • People: 2
      Replies: 1
    • August 10, 2020
    • Upgrade VRAs manually or automatic?

      We’re looking at upgrading from 6.5 to 7.0U3.  Our protected environment is ESXi 6.5 and the DR site is ESXi 6.7.  Both are running vSphere 6.5.  I see that during the upgrade you have the option of upgrading the VRAs either manually, after the ZVM upgrade, or automatically during the upgrade.  I was wondering which […]

    • People: 2
      Replies: 2
    • August 5, 2020
    • Unable to log in to VRA

      After I see “Security and Hardening with Zerto” document, I want to access the VRA to manage the ports of the VRA. I tried to log in using root with authentication key in putty by referring to KB1594. But it failed with the message below. login as: root Authenticating with public key “imported-key” Unable to […]

    • People: 2
      Replies: 3
    • July 22, 2020
    • Can we use and existing DB server for new ZVM ?

      We are installing new ZVM but wants to create a separate DB instance of an existing external DB server (Already used by Zerto ZVM 7.5). Does Zerto support use of existing external DB server (Already used by Zerto ZVM 7.5). Is Zerto is going to create the new DB instance or overwrite the  exiting DB instance

    • People: 1
      Replies: 0
    • July 20, 2020
    • Zerto live failover with VMs shutdown prior.

      Hi All, I want to do the following. Shudown VMs on protected site. Perform Live failover. (Commit option. None, VM Shutdown. No, Use latest checkpoint) Perform OS health / networks tests in DR site (<24 hrs) Select Rollback Manually restart Protected site Want to know if: After manually shutting down VMs will a checkpoint be […]

    • People: 1
      Replies: 1
    • July 16, 2020
1 2 3 … 14 15 16 … 35 36 37

The forum ‘VMware’ is closed to new topics and replies.