• This forum has 554 topics, 1,467 replies, and was last updated July 9, 2024 by Jacob C.
    • VMware
    • Offsite Cloned VM not starting

      An Offsite Cloned VM is not powering up on the target vCenter I am getting errors related to Cannot open the disk “*.vmdk” or one of the snapshot disks it depends on Failed to lock the file.   Did anyone see this error recently? Thanks  

    • People: 1
      Replies: 1
    • October 23, 2019
    • Keep Source VMs and Reverse-Replicate

      We plan to do a MOVE of a VPG from our Protected Site to our Recovery Site.  This is a PLANNED migration while both the Protected Site and Recovery Site are up & running.  However, we’d like to be able to: 1) Keep the source VMs on the Protected Site, 2) Initiate Reverse-Replication, AND 3) […]

    • People: 2
      Replies: 2
    • October 22, 2019
    • Esxi 6.5 with build 10719125

      <h3>Zerto version on source is 6.0u1 and customer has added 3 EXI hosts with 6.5 with build 10719125 version. VRA deployment is failing stating the version is not supported. Compatibility matrix does not show anything for 6.0 version. Please let me know if it is supported. Can we tweak the support version file in zerto?</h3>

    • People: 2
      Replies: 1
    • October 22, 2019
    • ZVR 6.5U4 replicate to ZCC 6.0.U4

      Hello, We have a DRaaS provider that we connect to via the Zerto Cloud Connector. We are planning to upgrade to vsphere 6.7.u3 and know now that we need to upgrade our on prem ZVR from 6.0u4 to ZVR 6.5U4. As I recall we need to be within one major version up or down of […]

    • People: 2
      Replies: 1
    • October 18, 2019
    • Time incorrect on failed over vm's

      Aloha, Whenever I fail-over a vm, it boots with a time 10 hours into the future. It just so happens Hawai`i is UTC -10. The hosts receiving the vm’s are Dell 930’s. In the DRAC i set the timezone to Pacific/Honolulu. I also made sure the time in the BIOS was set properly. This worked […]

    • People: 3
      Replies: 2
    • October 17, 2019
    • vCenter Server and ZVM

      We plan to hot storage-vmotion our vCenter Server at our Protected Site to another ESXi cluster within the same site.  Will this cause any issues with Zerto?

    • People: 2
      Replies: 1
    • September 23, 2019
    • Zerto events in vCenter Events list

      I’m getting the following alerts in VMware and would like to ask if they are important enough to be monitored? Zerto:Alert turned on at 23/09/2019 10:01:31 AM: The Zerto Virtual Manager is not connected to site CP01 (10.10.10.14:9081), error, 23/09/2019 10:01:33 AM, Zerto Alarm ‘com.zerto.event.ZvmToZvmConnection’ on Datacenters changed from Green to Red info, 23/09/2019 10:01:35 […]

    • People: 1
      Replies: 0
    • September 23, 2019
    • Zerto Help after vCenter repair

      Hello, The agency I support recently ran into a known issue with vCenter 6.0 that required us to repair/rebuild the vCenter by deleting it all together and starting from scratch. I was unaware how much this would effect the Zerto Replications at the agencies. To make things worse, I made the decision to use the […]

    • People: 2
      Replies: 1
    • September 17, 2019
    • Journal Location

      Browsing the files located on the datastores that we use as Journal locations for our protected/critical VMs (under “ZeRTO volumes” folder) yesterday, I noticed that on one of the Journal locations, the “…_log_volume.vmdk” virtual disks have the latest modified dates 9/9/2019 and other virtual disks have modified dates 2/5/2019 and earlier.  There are no VMDK […]

    • People: 1
      Replies: 0
    • September 12, 2019
    • VMWare 6.5 Encryption

      We are looking at using data encryption in VMWare 6.5 .  In this scenario a Key Management Server works in concert with vCenter to provide encryption/decryption keys for when a VM boots up.  In essence, a powered down VM is data-at-rest encrypted.  Does Zerto have guidelines for set up in this environment, how Zerto movements […]

    • People: 4
      Replies: 6
    • September 12, 2019
    • Zerto 7.0 U2P1 spamming vCenter 6.7 with tasks

      Hi, we are running newest Zerto 7.0 U2P1 with vCenter 6.7.0.2. Repeating every 15 minutes, zerto is spamming the vCenter recent task section with following entries for each esx host: open firewall ports start services It is annoying the whole admin-team. Maybe I can edit the tweaks.txt file, but I dont know the correct commands […]

    • People: 1
      Replies: 1
    • September 12, 2019
    • vCenter & Host 5.1 Migration

      Hello everyone. I need some suggestion for my up coming migration task. Below is my current setup: – ESXi 5.1 U3 – vCenter 5.1 (with about 30VMs) – Zerto 6.0U1 We will be undergoing full infra upgrade, so we will be upgrading from current ESXi 5.1 to 6.5, vCenter 5.1 to 6.5 as well. So […]

    • People: 1
      Replies: 0
    • September 10, 2019
    • VPG0055 – VPG error

      VPG0055 – VPG error Recovery volume size 80GB doesn’t match protected volume size (0 GB) for VM xx protected VM disk size is showing correct, how to check the reovery disk size, why this error we get?

    • People: 2
      Replies: 1
    • August 30, 2019
1 2 3 … 18 19 20 … 35 36 37

The forum ‘VMware’ is closed to new topics and replies.