• This forum has 554 topics, 1,464 replies, and was last updated July 2, 2024 by Mike C.
    • VMware
    • Journal best practices

      We have a few VMs that we are protecting in our environment that are about 5TB in size.  Data is constantly written/deleted.  In these cases we are using Zerto mainly for protecting the OS.  I am noticing that the Journal isn’t keeping up with all of these reads/writes.  Is there any way to reduce the […]

    • People: 3
      Replies: 2
    • March 5, 2019
    • AD failover, unable to sync NTP

      When we failover test/live  , our AD does not get the NTP time , when it power up it says it’s using CMOS time when running w32tm /query /source , due to the time difference between UTC time and EST time (5 hours behind)  so every time we failvoer , we have to manually perform […]

    • People: 3
      Replies: 6
    • February 27, 2019
    • AD failover, unable to sync NTP

      When we failover test/live  , our AD does not get the NTP time, due to the time difference between UTC time and EST time (5 hours behind)  so every time we failvoer , we have to manually perform w32tm /resync /force to set the time before we can bring up other VPGs.  Is there a […]

    • People: 1
      Replies: 0
    • February 27, 2019
    • Delete from Disk greyed Out

      We have a VM (several really) that was replicated using zerto to our vCenter  (from a vCenter to our vCloud Director). This particular VM did a test failover and then the protected site had Zerto removed ungracefully.  So the test was never cleaned up properly and the VM was still registered at the recovery site […]

    • People: 5
      Replies: 4
    • February 22, 2019
    • Change CPU and RAM when failover

      hi Zerto support just told me that for this I need to create my own script to resize my VMs when doing a failover for example VM in production is 64GB RAM and 16 CPUs but customer wants only 16GB RAM and 4 CPUs at the recovery site…. so has anyone create this script to […]

    • People: 4
      Replies: 3
    • February 8, 2019
    • Force Sync VPG question

      When we did some failover testing on a DB VPG we had one DB not come up correctly.  I was instructed to force sync the VPG and this corrected the issue.  Is it possible to do a force sync on a VPG as a scheduled task or can it only be done manually via the […]

    • People: 3
      Replies: 5
    • January 29, 2019
    • VCD 9.5 support

      Hello, Can we have an ETA for VCD 9.5 support? It simply does not work (breaking change in API auth). VCD 9.5 is a big milestone, bringing lots of improvement in term of UI and extensibility, so lots of CSP are eager to upgrade to it. TIA

    • People: 4
      Replies: 7
    • January 23, 2019
    • How to check the available license units

      We have procured 500+ license for migrating the workload between datacenters and migrated few workloads to target DC, is there any way to check the remaining available license units, which can be used for the future migration?

    • People: 1
      Replies: 0
    • January 23, 2019
    • Migrate vm between ESXs during a Test Failover

      Hi, We’re running a Test Failover in a vmware platform. The destination is a vmware cluster with 3 ESX. Everything worked fine but if we try to move a vm from one ESX to another ESX, the option appears disabled (migrate; change compute resources only). We can move succesfully other VMs running in the cluster […]

    • People: 2
      Replies: 1
    • January 16, 2019
    • Flooding of "Refresh storage information" tasks

      hello there! we have vSphere 6.5u2 running and upgraded from Zerto 6.0 to 6.5u2 recently. after zerto upgrade there appear every minute about 5-10 tasks named “Refresh storage information” regarding datastores that are used for replication. With Zerto 6.0 there were none of this tasks flooding the “Recent Tasks” panel in the vSphere Web Client… […]

    • People: 3
      Replies: 3
    • January 16, 2019
1 2 3 … 22 23 24 … 35 36 37

The forum ‘VMware’ is closed to new topics and replies.