• This forum has 554 topics, 1,464 replies, and was last updated July 2, 2024 by Mike C.
    • VMware
    • Understanding VPG storage sizes as reported by ZVM

      We have been asked several times by clients what the Zerto storage values relate too and how they are calculated – hopefully this is useful to others…. When looking at the VPG details you will see that the ZVM reports back the following storage values, these values are also used in various reports and API […]

    • People: 2
      Replies: 1
    • January 4, 2023
    • Multiple vCenter replication pairs

      Hello all, Could you guys please let me know how many Zerto nodes are required for the following setup: Number of sites: 3 (A, B, C). All sites are considered as active and recovery sites for one of the other two. Number of vCenter servers per site: 2 ( Management, Compute) I am planning to […]

    • People: 1
      Replies: 2
    • January 4, 2023
    • Z-VRA’s not powering down for host maintenance

      When trying to remediate my ESXi hosts using Lifecycle Manager, the VRA’s are not powering down to allow the hosts to go into maintenance mode.  If I manually place the host into maintenance mode, they power off.  Anyone know a fix? vCenter – 7.0.3 Zerto – 9.0. U4

    • People: 3
      Replies: 2
    • January 3, 2023
    • DRS moving VMs to host before VRA is online

      When we perform host maintenance, protected VMs are being moved to the hosts via DRS before the VRA is fully online.  This is causing up to 2 hour delta syncs to happen before we can move on to the next host. Is there a way to prevent VMs from moving until the VRA is ready?

    • People: 2
      Replies: 1
    • December 13, 2022
    • DR side VRA evacuate fails

      vcenter 7.0up3g, Zerto 9.5 update 3, ESXi 7.0 up3 trying to evacuate and DR side host/vra give error: Failed to add disk scsi0:6. Object not found Cannot open  (scsi # can be different) Zerto saying may be a VMware issue: message = “Object not found” – signalize that we can not find the disk, but […]

    • People: 1
      Replies: 0
    • November 21, 2022
    • Failover RecoverTime much longer than FailoverTest

      We have an 11 VM VPG that will become accessible relatively quickly when we run our failover test.  When we run an actual failover it takes about 90 minutes for all 11 VMs to come online. Can someone help me understand the different under hood on the recovery site when we run a  failover test […]

    • People: 1
      Replies: 3
    • November 14, 2022
    • Obtaining timelines of entering/leaving protection

      Second time lucky after the forum message popup disappeared with my about-to-be-sent post 🙁 I have taken over an embryonic Java project whose purpose is to obtain information about when VMs enter and leave protection. We need a timeline of VM activities from a protection point of view. I am already well-versed in obtaining event […]

    • People: 1
      Replies: 5
    • October 30, 2022
    • VRA still exist after uninstalling

      I uninstalled multiple VRAs using the uninstall option in the Zerto management webpage.  The uninstall progressed without any errors and the results were “uninstallation completed successfully”.  I then checked the ESX host and all of the VRAs are still installed any running.  Before performing the uninstall there were no VPGs or VMs listed.  What is […]

    • People: 1
      Replies: 0
    • October 4, 2022
    • Move recovery site’s ZVM to another server

      Hi, we’re running Zerto v9.0-U2. We have one PROD site with VPGs replicating our vSphere VMs to one recovery site. We’re having some issues with the ZVM server at the recovery site and would like to replace it with a new one. I found KB article 000004266, is it what I need to follow?? The […]

    • People: 1
      Replies: 0
    • September 30, 2022
    • Failover

      Can anyone point me to any detailed documents of where I can find information on what exactly what is occurring behind the scenes on each step of a fail-over? – I am looking for fine details of what is occurring at each stage listed below. Fail-over is initiated of VPG Failing over before commit (Preparing […]

    • People: 1
      Replies: 1
    • September 23, 2022
    • Can’t add cluster as vCenter Resource pool in ZCM

      Having an odd issue. We’re looking to decommission a cluster in VMware (hosts are older and planned for decom), but Zerto is using the cluster as the recovery host resource. All VMs moved out of the cluster, and was going to move the VMs to a new Recovery host in the ZVM, but it will […]

    • People: 1
      Replies: 0
    • September 13, 2022
    • Zerto Orchestrator feedback

      I see that Zerto Orchestrator is a tool to help with testing. It was last updated in 2018. Is anyone using it? Do you get value from it? Why hasn’t it been upgraded? Is support expected to continue, or will it stop being supported in the near future? Is Zerto 9.5u3 still compatible with Orchestrator? […]

    • People: 1
      Replies: 0
    • September 12, 2022
1 2 3 … 5 6 7 … 35 36 37

The forum ‘VMware’ is closed to new topics and replies.