This topic has 1 reply, 2 voices, and was last updated August 28, 2019 by Fanyu Z.

Connect 2 ZVM via WAN network

Israel T
August 28, 2019 06:57:14 AM

Submitted on behalf of Hakan B:

How can I connect 2 ZVMs via WAN network and how should I configure the policies on firewall also which ports should I use for this setup?
Or is this possible anyway? Any workaround?
Fanyu Z
August 28, 2019 07:19:29 AM
In order to connect 2 ZVMs, please click on PAIR under SITES tab in the Zerto User Interface. In the Add Site dialog, specify the following:
Host name/IP: IP address or fully qualified DNS host name of the remote site Zerto Virtual Manager to pair to.
Port: The TCP port communication between the sites. Enter the port that was specified during the installation. The default port during the installation was 9081.

Once the sites are paired, meaning that the Zerto Virtual Manager for the local site is connected to the Zerto Virtual Manager at the remote site.

Firewall Considerations:
- For VMware/Hyper-v environment, please refer to page 6 in the following document.
http://s3.amazonaws.com/zertodownload_docs/Latest/Zerto%20Virtual%20Replication%20Installation%20Guide%20for%20vSphere%20and%20Hyper-V.pdf?cb=1566975676
- For AWS environment, please refer to page 17 in the following document.
http://s3.amazonaws.com/zertodownload_docs/Latest/Zerto%20Virtual%20Replication%20AWS%20Enterprise%20Guidelines.pdf?cb=1566975676
- For Azure environment, please refer to page 10 in the following document.
http://s3.amazonaws.com/zertodownload_docs/Latest/Zerto%20Virtual%20Replication%20Azure%20Enterprise%20Guidelines.pdf?cb=1566975676

The forum ‘Support Q & A’ is closed to new topics and replies.